RPP meltblown cartridge Product Description Working Principle Product Advantages Technical parameters Product Details Customer Cases
PP meltblown cartridge is a tubular cartridge made of non-toxic and odorless polypropylene particles, which is heated and melted, spewed, traction and accepted for forming, and is not only used in water purification in large quantities. It also has outstanding chemical compatibility and is suitable for the filtration of strong acid, strong alkali and organic solvents. This kind of cartridge is a kind of fixed pore size deep filtration core with ultra-fine polypropylene fiber filter media, and the filter material meets the relevant requirements of FDA.INQUIRY
|Applications||Pharmaceutical industry, food industry, electronics industry, petroleum and chemical industry, etc.|
|Filtration media||Pharmaceutical industry, food industry, electronics industry, petroleum and chemical industry, etc.|
High dirt retention capacity, a true graded capture of particles by density is achieved throughout the deeper layers of the cartridge, allowing the cartridge to be most fully effective; higher dirt retention capacity means a long service life and low replacement frequency as well as cost savings; low density at the surface of the cartridge and a gradual increase in density from the surface to the centre of the cartridge; no surface blind spots that would reduce the flow rate of the cartridge and increase the replacement frequency There are no surface blind spots that would reduce the flow rate of the cartridge and increase the frequency of replacement.
High filtration precision,Over 90% retention rate relative to filtration accuracy.
High filtration precision:
Wide range of filtration precision to meet various application requirements,Good dirt retention,Long service life.
Internal thread construction for enhanced pressure resistance,Wide chemical compatibility, high flow capacity and low differential pressure,Washable and regenerable, economical and Sterilisation by chemical methods, in-line steam.
With internal thread construction:
Enhanced pressure resistance.
Using polypropylene composite filter membrane
Made of food grade material:
Filter media: polypropylene fibre membrane ,Upper and lower flow support material: polypropylene, Support frame and structural elements: polypropylene, Sealing materials: silicone rubber, nitrile rubber, EPDM rubber, fluoroelastomer
Different interfaces support customisation
A wide range of interfaces to display, Customisation available on request.
Name: PP folded cartridge Length: 10", 20", 30", 40", 50", 60"
Applicable P H: 1~13 Max. differential pressure: 4.0Bar
Operating temperature: 1Bar 80°C, >50°C Stainless steel support ring recommended Sterilisation: 121°C, 30 minutes in-line steam sterilisation
Addable end cap material: polypropylene interface Type: flat press-in type (other connections can be added)
Filtration accuracy: 0.1, 0.22, 0.45, 1, 3, 5, 10, 20, 50 (μm) Gaskets/seals: silicone rubber, ethylene propylene rubber, nitrile rubber, fluorine rubber
Can be customized according to different working conditions
Use: Cartridge filter elementFlow rate: 20t/h
Use: Circulating water treatmentFlow rate: 20t/h
Use: Cartridge filter circulating water treatmentFlow rate: 200m3/h
Enter Your Email for an Instant 5% OFF Your First Order