HF40PP015D01 40‑Inch 15 Micron Large Flow Water Filter Cartridge
Introduction:The HF40PP015D01 large flow water filter cartridge is a 40‑inch 15‑micron pleated consumable built with full polypropylene material, adopting inside‑to‑outside flow direction and large‑diameter structural design. It is widely used as safety pre‑filtration for industrial water treatment projects, effectively trapping suspended solids, fine sediment, rust particles and colloidal impurities to protect downstream membrane systems including RO, NF and UF. Hot‑melt welding without glue avoids secondary contamination, offering reliable acid‑alkali resistance for circulating water, raw water and various process fluid purification. The HF40PP015D01 cartridge is dimensionally built to match mainstream large‑flow filter housings on the market, supporting quick field replacement. It is well suited for water plant routine maintenance, EPC tender projects and large‑scale industrial water‑making systems.
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Working Principle
The HF40PP015D01 filter cartridge works on inside‑to‑outside radial filtration principle. Untreated water enters the inner cavity from the bottom opening of the cartridge, then flows radially outward through multi‑layer gradient polypropylene pleated media. Solid contaminants such as sediment, rust fragments and suspended particles are captured on the surface and within pleated layers of the filter media. Purified liquid flows out into downstream pipelines and membrane equipment.
Thanks to large pleated filtration area, single‑cartridge flow capacity is high with low initial pressure drop. As intercepted pollutants accumulate, differential pressure between inlet and outlet will rise gradually. Operators should replace HF40PP015D01 once pressure difference reaches the preset threshold, so as to restore system flow rate and prevent excessive energy consumption. Gradient filter media combines surface filtration and depth filtration, improving overall dirt‑holding capacity for long‑time continuous operation.
Core Advantages
Large‑Diameter 40‑Inch Pleated StructureHF40PP015D01 features large outer diameter, which provides huge effective filtration area for each element. Under the same system flow demand, fewer cartridges are required inside filter housing, reducing spare‑parts inventory and manual replacement workload for industrial sites.
Stable 15 Micron Nominal Filtration PerformanceGradient polypropylene pleated media realizes stable 15‑micron particle retention. HF40PP015D01 acts as reliable safety barrier before membrane systems, lowering solid pollutant load and reducing scratch risk for expensive membrane sheets.
All‑PP Hot‑Melt Welded AssemblyFilter media, supporting layers and end caps of HF40PP015D01 are all polypropylene material assembled by hot‑melt bonding, no adhesive added. It delivers good acid‑alkali compatibility for most industrial water conditions and eliminates risk of glue leaching into fluid.
High Dirt‑Holding Capacity with Low Initial DPOptimized pleat design maximizes contaminant storage volume. HF40PP015D01 can hold large amounts of impurities before reaching blocking pressure difference, extending service interval and cutting total filter operating cost. Low initial pressure drop decreases pump energy loss during continuous running.
Dimensionally Matched for Standard Large‑Flow HousingsHF40PP015D01 is designed to fit widely‑used industry large‑flow filter vessels. Built‑in lifting handle enables fast cartridge change‑out. Multiple sealing options including EPDM, silicone and nitrile are available to satisfy different liquid temperature and chemical compatibility requirements.
Main Application Scenarios
RO / NF Membrane Safety Pre‑filtration: HF40PP015D01 removes particulate contaminants to protect reverse osmosis and nanofiltration membrane elements.
Industrial Circulating Cooling Water Filtration: Capture rust and suspended solids to protect heat exchanger and cooling tower auxiliary equipment.
Raw Surface Water Pretreatment: Purify reservoir water and river water for industrial plant intake.
Power Plant Make‑up Water Treatment: Pre‑filtration for boiler feed‑water and auxiliary water systems.
General Low‑Corrosion Chemical Process Liquid Filtration: Purify various industrial process water streams.
Water Treatment EPC Project & System Retrofitting: HF40PP015D01 serves as standard consumable for new‑build or upgraded high‑flow filter systems.
FAQ
Q1: What is HF40PP015D01 used for?
A: HF40PP015D01 is 40‑inch 15‑micron polypropylene large‑flow pleated filter cartridge, mainly used as safety pre‑filtration in industrial water treatment to remove sediment, rust and suspended solids.
Q2: What is the operating temperature limit for HF40PP015D01?
A: Continuous maximum operating temperature for polypropylene material is approximately 82℃. Recommended replacement differential pressure is 0.08‑0.12 MPa. Do not exceed maximum working pressure of your filter housing.
Q3: Can HF40PP015D01 fit my existing filter vessel?
A: HF40PP015D01 follows industry‑standard large‑flow dimensional specifications. Please provide housing drawing and sealing requirements for technical cross‑check before placing orders.
Q4: What seal materials are compatible with HF40PP015D01?
A: Optional sealing materials include EPDM, silicone and nitrile rubber. Select proper seal according to feed‑liquid chemistry and working temperature.
Q5: Can you supply bulk quantity of HF40PP015D01 for projects?
A: Yes, we support mass project supply, pre‑shipment inspection and customized modification according to project technical parameters.
Recommended Related Products
Please fill in your procurement needs and contact information
