HFU620UY400JU High Flow Water Filter: 20‑Inch 400 Micron Pleated Replacement Cartridge
Introduction:The HFU620UY400JU high flow water filter is a 20‑inch pleated filter cartridge commonly used in industrial water pretreatment, circulating water filtration, and high‑flow liquid filtration systems. With a nominal filtration rating of 400 microns, it is designed to remove larger suspended solids, sediment, rust particles, and coarse contaminants before they enter downstream equipment such as fine filters, heat exchangers, membrane systems, and process water pipelines. The HFU620UY400JU cartridge is especially suitable for applications requiring high flow capacity, low initial pressure drop, and large dirt‑holding capacity in a compact 20‑inch configuration.
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Working Principle
The HFU620UY400JU high flow water filter generally adopts a pleated radial filtration structure. Untreated water flows into the inner core of the filter cartridge and then passes radially outward through the multi‑layer pleated filter media. Larger contaminants such as sediment, rust, and suspended solids are captured on the media surface and within the filter layer, while filtered water continues to flow through the outer sleeve into the downstream pipeline.
The 400 micron rating makes this cartridge particularly effective as a coarse pre‑filtration stage rather than a final fine filtration stage. It is typically used to reduce the solid load on downstream equipment, protecting finer filters, membranes, and process equipment from abrasive particles and pipeline debris. As contaminants accumulate, the differential pressure between inlet and outlet gradually increases. When the pressure difference reaches the recommended replacement value, the cartridge should be replaced to restore flow capacity and prevent excessive energy consumption or system performance decline.
Core Advantages
20‑Inch Compact High Flow DesignThe HFU620UY400JU offers high flow performance in a 20‑inch cartridge length, making it suitable for systems with limited housing height. It can help reduce the number of filter elements required per vessel and lower overall maintenance frequency.
400 Micron Coarse Pre‑Filtration PerformanceWith a 400 micron rating, the HFU620UY400JU is effective at removing larger suspended solids, sediment, rust particles, and coarse contaminants. It is commonly used as a first‑stage protection filter before finer filtration equipment.
Large Dirt‑Holding CapacityThe pleated media structure provides a large filtration area within a single cartridge, allowing the filter to capture a significant amount of solid contaminants before reaching the blocking pressure difference. This helps extend service intervals and reduce cartridge consumption.
Low Initial Pressure DropThe high‑area pleated configuration allows water to pass through the filter media with relatively low resistance. This reduces system pressure drop, lowers energy consumption, and helps maintain stable flow rates during long‑term operation.
Direct Interchangeable Replacement SolutionOur compatible HFU620UY400JU replacement cartridge is designed to match the original installation dimensions, interface configuration, and sealing requirements. It can be installed into existing high flow filter housings without equipment modification, making it suitable for aftermarket replacement and bulk project procurement.
Main Application Scenarios
Industrial Water Pretreatment: Remove suspended solids, sediment, and rust before fine filtration equipment.
Circulating Water Filtration: Protect heat exchangers, cooling towers, and process pipelines from particulate contamination.
RO and Membrane System Pre‑Filtration: Reduce coarse solids load before reverse osmosis and nanofiltration systems.
Raw Water and Surface Water Treatment: Filter river water, lake water, and reservoir water for industrial use.
General Industrial Process Water Purification: Suitable for various high‑flow water filtration applications.
Water Treatment Plant Retrofit and Maintenance: Compatible replacement for existing high flow filter housings.
FAQ
Q1: What is HFU620UY400JU used for?
A: HFU620UY400JU is a 20‑inch 400 micron high flow pleated filter cartridge mainly used for industrial water pretreatment, circulating water filtration, and coarse pre‑filtration before fine filters and membrane systems.
Q2: What is the micron rating of HFU620UY400JU?
A: HFU620UY400JU typically refers to a 400 micron high flow filter cartridge. Actual filtration performance should be confirmed according to the original part drawing and system requirements.
Q3: Can your replacement cartridge replace HFU620UY400JU directly?
A: Yes. Our compatible HFU620UY400JU cartridge is designed to match the original installation dimensions, interface, sealing structure, and high‑flow performance. It can be installed into standard high flow filter housings without equipment modification.
Q4: When should HFU620UY400JU be replaced?
A: The cartridge should be replaced when the differential pressure reaches the recommended threshold, typically around 0.08–0.12 MPa, or when the system flow rate can no longer meet design requirements.
Q5: Can you supply bulk HFU620UY400JU cartridges?
A: Yes. We support bulk supply, project quotation, pre‑shipment inspection, and customized specifications according to customer requirements.
Recommended Related Products
Please fill in your procurement needs and contact information
