P-all HFU620UY400H4W high flow water filter for RO system
Introduction:Introduction: Replacement P-all high-flow cartridges are made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6 inches / 152mm, no center rod, unidirectional opening, and specially designed to flow the liquid from the inside to the outside, ensuring that all contaminant particles are trapped inside the cartridge. The ultra-high flow rate design allows for a significant reduction in the use of cartridges and filters for the same flow rate application, resulting in significant savings in equipment investment costs and labor costs.
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Product parameter:
P-all HFU620UY400H4W High Flow Rate Water Filter cartridge profile: The high-flow filter element is made of continuous high-performance fiber filter material and wound with special special equipment. The length of the filter element is as high
The high-flow filter element is made of continuous high-performance fiber filter material and wound with special special equipment. The length of the filter element is as high as 70" (1778mm), which prevents fiber deformation and fiber shedding, and can be installed in existing equipment. The high-performance fiber filter fluid avoids the precipitation of impurities and pre-washing when starting up. Ultra-long filter element 70" (1778mm) ) It is suitable for applications with high flow rate and high pollution capacity. It has high mechanical strength and will not be deformed even under severe process conditions. It can be directly installed in the existing shell without replacement or modification.
Product Features
1. The combination of surface filtration and deep filtration can significantly reduce the number of cartridges and significantly reduce the size of the supporting filter shell compared with ordinary cartridges.
2. The combination of surface filtration and deep filtration can significantly reduce the number of cartridges and significantly reduce the size of the supporting filter shell compared with ordinary cartridges.
3. The design of convenient handle significantly reduces the time of cartridge replacement and makes cartridge replacement simple and portable.
4.The overall polypropylene design and hot melt welding treatment effectively prevent the end cap from falling off and secondary pollution.
5. The design of sealed interface reduces the risk of bypass flow and ensures the sealing and reliability of filtration.
6. The folded design increases the filtering area and makes the pressure drop significantly lower than that of ordinary cartridge.
7. The design of large diameter increases the dirt holding capacity, prolongs the service life and reduces the production cost.
Please fill in your procurement needs and contact information
