P-all HFU620UY400H4 high flow water filter for RO system
Introduction:Introduction: P-all HFU620UY400H4 High Flow Rate Water Filter cartridge profile: The high-flow filter element is made of continuous high-performance fiber filter material and wound with special special equipment. The length of the filter element is as high
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Product Description
Replacement P-all high-flow cartridges are made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6 inches / 152mm, no center rod, unidirectional opening, and specially designed to flow the liquid from the inside to the outside, ensuring that all contaminant particles are trapped inside the cartridge. The ultra-high flow rate design allows for a significant reduction in the use of cartridges and filters for the same flow rate application, resulting in significant savings in equipment investment costs and labor costs.
Product Features
The combination of surface filtration and deep filtration can significantly reduce the number of cartridges and significantly reduce the size of the supporting filter shell compared with ordinary cartridges.
2. The combination of surface filtration and deep filtration can significantly reduce the number of cartridges and significantly reduce the size of the supporting filter shell compared with ordinary cartridges.
3. The design of convenient handle significantly reduces the time of cartridge replacement and makes cartridge replacement simple and portable.
4.The overall polypropylene design and hot melt welding treatment effectively prevent the end cap from falling off and secondary pollution.
5. The design of sealed interface reduces the risk of bypass flow and ensures the sealing and reliability of filtration.
6. The folded design increases the filtering area and makes the pressure drop significantly lower than that of ordinary cartridge.
7. The design of large diameter increases the dirt holding capacity, prolongs the service life and reduces the production cost.
P-all HFU660UY045HW High Flow Rate Water Filte cartridge parameter:
| Item | Details |
|---|---|
| Initial pressure difference | 0.02 MPa |
| Replacement pressure drop | 2.4 Bar |
| Maximum allowable pressure drop | 3.4 Bar |
| Maximum operating temperature | 80℃ |
| Filtration direction | From inside to outside, without internal skeleton |
| Filtration rating | 1.5μm, 3μm, 4.5μm, 10μm, 20μm, 30μm, 70μm |
| Filter material | Polypropylene, glass fiber |
| Sealing material | EPDM, NBR, FKM, Neoprene |
| Outer diameter | 6 inches (152.5mm) |
| Length | 20 inches (508mm), 40 inches (1016mm), 60 inches (1524mm) |
Please fill in your procurement needs and contact information
