Power Plant Safety Filter Core P-all HFU640UY100J
Introduction:Power Plant Safety Filter Core P-all HFU640UY100J send to Indonesia
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Specification Power Plant Safety Filter Core P-all HFU640UY100J
Filter Media | Polypropylene(PP) |
Length | 60"(1524mm) |
Outside Diameter | 6 inch (152mm) |
Inside Diameter | 73.5mm |
Filtration Rating | 10μm, 100μm |
Support/Drainage | Polypropylene (PP) |
End Cap Material | Glass fiber reinforced Polypropylene (PP) |
Outside | Rigid Hard Cage, Belt,Stainless Steel(special) |
Seal Material | EPDM, Buna-N, Viton |
Maximum Operating Temperature | Pleated glass fiber:121°C Pleated PP: 82°C Melt Blown PP: 65°C |
Maximum Differential Pressure | Pleated glass fiber:3.4 Bar at 121°CPleated PP: 3.4Bar at 82°CMelt Blown:1.03Bar at 65°C |
Recommended Change out Differential Pressure | 2.5Bar at 20°C |
Feature of Power Plant Safety Filter Core P-all HFU640UY100J
žThe structure of gradual aperture
ž Maximum flow of one filter can be up to 110m³/h during the water filtering.
ž Filtration system size can be reduced by 50% in maximum.
ž Filters with the length of 20", 40"and 60" can be offered.
ž Inside-out directions guarantee all impurities will be left inside the filters.
If you don't have the high flow cartridges model ,please provide the further information as below:
1,Photo of filter （including the both end caps）
2,ID,OD,Height
3,Filtration Micron and filter media?
4,Qty
Warmly welcome to LEFILTER factory ,
Please fill in your procurement needs and contact information
