Reverse osmosis polyamide membrane (RO membrane) - specially designed for water treatment - highly reliable
Introduction:New membrane elements allow a reverse osmosis (RO) system to operate optimally with the highest removal of dissolved salts (also known as salt rejection) and the greatest production of permeating water at its design pressures. With time, these performance characteristics will decline to a point where it may be necessary to replace the RO membrane elements. Because many facilities depend on the RO for meeting their purified water needs, anticipating when the membranes are going to need replacement may be critical to the plant’s operation.
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Why does the RO membrane need replacing?
Typically, an RO membrane will last between 3 and 4 years, although the quality of daily maintenance can extend or shorten this lifespan. As time passes, the membrane collects contaminants such as pollutants, particulate matter, and colloidal substances, which cause clogs and decrease water output. These impurities not only hinder the efficiency of the membrane but also lower the quality of the water to levels that don’t meet health and industry standards.
As it ages, the membrane loses its effectiveness in intercepting and filtering out impurities, reducing water production rates and subpar effluent quality. An old or dirty membrane fails to separate clean water from contaminants effectively. Therefore, you must replace the membrane periodically; this is crucial for restoring water flow and ensuring that the water you consume or use in industrial processes meets stringent purity standards.
How Do I Know if My RO Membrane Needs Replacing?
RO water mineral content (TDS)>90
To assess your RO membrane’s condition effectively, measure the Total Dissolved Solids (TDS) in your purified water using a TDS meter. A TDS value between 1 and 50 signifies excellent water quality, and a value between 51 and 90 indicates good water quality. If the TDS value surpasses 90, you should immediately replace your RO membrane.
Reduced Water Output
The Symptom
If you notice that your water purifier produces less water than usual under the same conditions (such as water pressure and temperature), this could be a red flag.
The Diagnosis
A reduced water output generally indicates that your RO membrane may be blocked. Over time, impurities, sediments, and other particulates can clog the membrane.
The Solution
Replacing the RO membrane to restore the system’s efficiency and prevent any secondary pollution is advised in this situation.
Increased Water Production
The Symptom
On the flip side, heed if water starts gushing out of your purifier noticeably faster.
The Diagnosis
This typically indicates damage to the RO membrane, causing it to lose its filtration capabilities entirely.
The Solution
Immediate replacement is crucial at this stage, lest you compromise the quality of your water.
Decline in Water Quality
The Symptom
A noticeable decline in water taste or appearance indicates something’s amiss.
The Diagnosis
Your RO membrane may be overrun with impurities and bacteria, affecting the effluent water quality and risking secondary pollution.
The Solution
Replacing a polluted membrane is imperative to regain your system’s efficacy and safety.
Time-Based Considerations
The Ideal vs The Real
The lifespan of an RO membrane is not absolute. It is influenced by various factors such as water quality, frequency of use, and maintenance. Generally, when the usage time reaches about 80% of the membrane’s ideal life, consider it time for a change.
When should you replace RO membrane?
On average, an RO membrane necessitates a replacement every 3-5 years. However, the lifespan can extend beyond the five-year mark if the membrane consistently yields high-quality water.
Timely replacement of the membrane rejuvenates your system’s water output rate and safeguards water quality, ensuring it complies with stringent health and industrial purity benchmarks. Don’t rely solely on the calendar; monitoring the water quality actively can offer invaluable insights into the membrane’s condition.
How long does the RO membrane last?
Reverse osmosis (RO) membrane’s longevity typically spans two and five years, making it a durable component in your water purification arsenal. This timeframe, however, isn’t set in stone; the actual lifespan can fluctuate based on factors such as water quality, frequency of use, and the meticulousness of your maintenance regimen.
What happens if RO membrane is not working?
A failing or contaminated reverse osmosis (RO) membrane can lead to various problems. These include reduced water flow, lower salt rejection rates, and compromised quality of the resulting demi water. These issues have implications for both residential and industrial water applications because the membrane becomes less effective in separating contaminants and filtering out salts. Consequently, there is a decrease in water flow, and the quality of water becomes unsuitable for consumption or specialized uses.
Conclusion
The RO membrane is a vital component of your water purification/reverse osmosis system, and knowing when to replace it is crucial for maintaining water quality. Be vigilant for signs like reduced or increased water output, a decline in water quality, or the passage of time nearing its service life. These indicators serve as your cue to replace the membrane, ensuring you continue to enjoy safe and clean drinking water.
Please fill in your procurement needs and contact information
