Replacement facet CR-22 coalescer filter cartridge

Replacement facet CR-22 coalescer filter cartridge 

PECOFacet Model CR coalescer cartridges provide high flow and low initial pressure drop. There cartridges are widely used in petroleum bulk storage terminals, turbine fuels, lube oils, refineries, and many other industrial applications.
Each coalescer cartridge is constructed of various media, precisely arranged in many layers and pleats, and wrapped around a perforated metal center tube for balanced flow and structural strength. All are encased in an outer sock material. Cartridges are 6” OD (152 mm) by 3 ½” ID (89 mm) and are available in standard lenghts from 11 ¼” (280 mm) to 57 ¼” (1450 mm). They are dimensionally interchangeable with Facet's full range of 6” OD coalescer cartridges.

Standard Design Features 
• Multi-layered media for increased solids holding capacity
• Ultra-fine solids removal
• Maximum water coalescence
• Balanced cartridge flow characteristics
• Recommended maximum operating temperature: 240°F (115oC)
• Withstands in excess of 75 psi differential pressure
• PH range from 5 to 9
• Screw base or open-end configuration
  Materials
• All metal components are treated against corrosion
• Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
• Buna-N gaskets-other materials are available on request
 

 Applications:
Chemicals, Resins, and Solvents
Hydraulic Oils
Hydrocarbons
Petroleum Refining Applications
Pipelines and Petroleum Terminals
Power Generation
Pulp and Paper Industry
Transformer Oils
 

 Relative part number
CR-11
CR-14
CR-22
CR-28
CR-28-SB
CR-33
CR-33-SB
CR-43
CR-43-SB
CR-56
CR-56-SB