ZLYC-150 Energy Saving Oil Purification System
Introduction:The Turbine Oil Purifier is designed according to the different boiling points of water and oil. It consists of a vacuum heating tank fine filter, a condenser, a prefilter, a water tank, an empty pump and an oil drain pump and an electrical cabinet. The empty pump draws out the air in the vacuum tank to form a vacuum.
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Equipment performance
1. Vacuum system: It consists of vacuum tank, vacuum pump, condensation tank, liquid accumulation tank and air supply system. The optimized structure design greatly increases the surface area of the oil in the vacuum system, and maximizes the travel of the oil in the vacuum system, so that the moisture and gas in the oil can be fully overflowed. This machine adopts an advanced defoaming system, so that the oil purifier will never appear the phenomenon of oil injection commonly seen in similar products when it is working.
2. Filtration system: Three-stage filtration is adopted, and the oil suction port coarse filter protects the oil pump and prolongs the service life of the main filter. There are two-stage fine filter behind the pump, so that the oil can quickly reach a high degree of cleanliness. The filter material is made of special graded pore glass fiber material, which can filter particles of different particle sizes in layers, which greatly improves the service life of the filter element. It has a perfect filter element structure, which can effectively reduce the surface flow rate of the filter material and obtain stable filtration accuracy.
3. Heating system: It adopts stage-by-stage heating, the surface heat load is less than 1.OW/cm2, and the oil will not be deteriorated due to overheating. The oil temperature can be adjusted arbitrarily from 0 to 100°C, automatically controlled, and equipped with a protection device. When the oil intake is too small, it will automatically stop working to avoid damage to the heater caused by dry burning.
4. Automatic control system: This machine adopts a series of automatic control instruments such as frequency converter, liquid level transmitter, temperature sensor, and vacuum sensor to collect various information about the operation of the equipment, and hand it over to the central processor for processing. Automatically control the operation of the entire equipment and monitor the operation status of the equipment. The machine is equipped with various protection devices (overload protection, overvoltage protection, phase sequence protection, abnormal operation shutdown protection), which can ensure the safe operation of the equipment.
5. Whole machine structure: The whole machine-integrated bridge structure reduces the volume. The overall removable oil tank is used to ensure oil-free operation on the ground and reduce environmental pollution. There are mobile, fixed, fully enclosed, vehicle-mounted and other models to choose from.
Please fill in your procurement needs and contact information
