
High Flow Self-cleaning Filter for Oilfield Injection Water
Introduction:Oilfield injection water treatment is a critical link to protect reservoir formations and extend the service life of downhole pumps and pipelines. Many oilfield operators are troubled by frequent filter cartridge replacement, unexpected shutdowns and high maintenance costs brought by traditional strainers. Our high flow self-cleaning filter delivers stable online filtration for large-volume injection water, effectively removing suspended solids, fine sand and corrosion debris. It serves as a reliable replacement for imported filter brands such as Pall and 3M, helping oil & gas facilities cut running expenditure and maintain continuous injection operations.
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Product Introduction
This high flow self-cleaning filter is specially engineered for the harsh working conditions of oilfield injection water systems. The complete set includes a sturdy water filter housing, precision wedge wire screen elements, PLC automatic control cabinet, drive motor and sewage discharge assembly. As a high-performance self-cleaning filter, it handles massive water flow continuously without manual element replacement or system shutdown during the cleaning cycle. Compared with conventional bag filters and disposable cartridge filters, this model features large dirt holding capacity, low backwash water consumption and strong resistance to scaling and corrosion. It is widely deployed in onshore oilfields, offshore platform water injection skids, produced water reuse and fracturing flowback water treatment. Our design optimizes the defects of imported counterparts, such as narrow flow channels, easy screen deformation and complicated on-site maintenance, providing a cost-effective domestic alternative solution for global oilfield clients.

Working Principle
Raw injection water flows into the filter chamber from the inlet and passes through the inner surface of the precision wedge wire screen. Suspended particles, fine silt, rust and organic debris are trapped on the screen surface, while purified water flows outward and exits from the outlet to the injection pipeline. With the accumulation of contaminants, the pressure difference between the inlet and outlet gradually rises. When the differential pressure reaches the preset threshold, or the programmed timer expires, the PLC system activates the automatic cleaning sequence. The drive motor rotates the suction scanner assembly, and the drain valve opens simultaneously. The pressure difference inside and outside the screen creates a high-speed reverse suction flow, stripping off the cake layer on the screen surface and discharging sludge out of the system through the sewage port. The whole backwash process only lasts 10 to 20 seconds. The main filtration pipeline remains open all the time, so oilfield water injection will not be interrupted. After cleaning finishes, the drain valve closes automatically, and the filter returns to normal filtration status, waiting for the next cleaning trigger signal.
Core Advantages
Uninterrupted high-flow operation:
Customizable large diameter housing supports ultra-high flow rate, perfectly matching the large-volume demand of oilfield injection wells.
Long service life filter screen:
316L stainless steel wedge wire screen, not easy to deform or damage, reusable for 5–10 years with proper maintenance, greatly reducing consumable investment.
Fully automatic unattended operation:
Dual trigger modes of differential pressure and timing, no need for on-site workers to monitor and clean frequently.
Low backwash water loss:
The backwash water consumption is less than 2% of the total flow, saving water resources for oilfield sites.
Strong anti-corrosion structure:
The water filter housing can be treated with anti-rust coating or customized with duplex stainless steel, adapting to high-salinity, scaling and corrosive injection water.
Easy integration:
Standard flange connection, compatible with existing oilfield injection skids, simple installation and space-saving layout.
Application Scenarios

Onshore oilfield produced water reinjection system
Offshore platform injection water filtration
Fracturing flowback water recycling and re-injection
Pre-filtration before fine filtration units in oilfield water treatment stations
Protection of downstream injection pumps, valves and wellhead pipelines
Heavy oil thermal recovery boiler feed water pre-treatment
Selection Guide
Confirm the maximum design flow rate of the injection water pipeline to determine the filter caliber and housing size.
Test water quality indexes:
salinity, pH value, solid content, particle size distribution, to select the screen precision (20μm, 40μm, 50μm, 100μm optional).
Select material:
carbon steel with anti-corrosion coating, 304 stainless steel, 316L stainless steel or duplex steel according to water corrosivity.
Confirm control mode:
standard PLC automatic control, or explosion-proof control cabinet for offshore and hazardous zone.
Define working pressure rating:
1.0MPa, 1.6MPa, 2.5MPa and higher pressure grades are available for customized production.
FAQs
Q1: Will the oilfield water injection stop during the self-cleaning process?
A1: No. This self-cleaning filter adopts online suction backwash design. Only a small local area of the screen is cleaned each time, the main flow channel keeps circulating, and the injection water supply will not be interrupted.
Q2: What is the difference between this self-cleaning filter and disposable high flow filter cartridge?
A2: The wedge wire screen of this filter can be repeatedly cleaned, no frequent cartridge purchase and replacement. It is more suitable for oilfield large-flow continuous working scenarios, and the long-term operating cost is much lower than disposable cartridge filtration solutions.
Q3: Can it handle high-salinity scaling injection water?
A3: Yes. We can adopt anti-scaling surface treatment for the water filter housing and screen, and match the control logic to shorten the backwash cycle to reduce scaling adhesion. For severe scaling conditions, we can add auxiliary chemical dosing interface.
Q4: What certificates can you provide for oilfield projects?
A4: We can supply ISO 9001, material test certificate, pressure vessel test report, and explosion-proof certificate for hazardous area applications, which meet the procurement requirements of oil & gas operators.
Q5: Can you customize the filter size and connection standard?
A5: Yes. We support customized design according to client’s P&ID drawing, including ANSI flange, API standard connection, special pressure rating and skid-mounted integrated package.
Related Products
XF Series auto self cleaning strainer
S304 S316 stainless steel fully Automatic Backwash Water
316L Stainless Steel Brush Self-Cleaning Filter for Corrosive Water
Heavy Duty Brush Type Self-Cleaning Strainer | Customizable Size & Material
Brush Type Self-Cleaning Filter | Automatic Backwash Filter for Industrial Water Treatment
Please fill in your procurement needs and contact information








