
Portable Oil Purification Trolley for Hydraulic Station Oil Filtration
Introduction:Hydraulic stations for steel mills, wind turbines, injection molding machines and heavy machinery rely on clean hydraulic oil to protect pumps, servo valves and actuators. Metal particles, rust sludge and dust contamination are the leading cause of hydraulic system failure, resulting in unexpected downtime and expensive component replacement. Our portable oil purification trolley serves as an offline kidney-loop filtration unit for hydraulic oil tanks. It can transfer new oil and clean contaminated oil on site, bringing oil cleanliness up to the required ISO standard. As a cost-effective alternative to imported filter carts from Pall, Hydac and Parker, it helps maintenance teams reduce oil consumption and extend the service life of hydraulic equipment.
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Product Introduction
This portable oil purification trolley is a mobile offline filtration unit built for hydraulic station maintenance, oil transfer and periodic oil conditioning. It is equipped with a reliable gear pump, multi-stage filter housing, pressure gauge, overflow protection valve and flexible hoses, and it uses interchangeable filter elements that match the standard hydraulic filter specifications widely used on industrial hydraulic circuits. The heavy-duty frame with silent universal casters allows technicians to move the trolley between different hydraulic stations, production lines and equipment bays easily. It supports two core working modes: filling clean new oil into hydraulic tanks and circulating offline filtration of contaminated oil. Many imported filter carts face problems including high purchase cost, long lead time and limited spare part supply. Our optimized design solves these pain points, with stable pumping performance under medium and high viscosity oil, built-in overpressure protection, and easy replacement of filter cartridges. It is widely adopted by steel plants, wind power farms, injection molding workshops, mining equipment maintenance yards and mobile heavy machinery service teams around the world.
Working Principle

The suction hose is placed into the hydraulic oil tank, and the motor-driven gear pump draws contaminated oil into the trolley. Raw oil first passes through the built-in suction strainer to block large metal fragments and debris and protect the pump from damage. Then the oil flows sequentially through the coarse filter and fine filter stages. The pleated glass fiber filter cartridge traps fine metal wear particles, silica dust and oxidation sludge. Clean oil flows out through the outlet hose and returns back to the hydraulic tank, forming a continuous offline circulation loop.
During the filtration process, the pressure gauge monitors the differential pressure of the filter element. When the pressure rises to the preset alarm value, it indicates that the filter cartridge is saturated with contaminants and needs to be replaced. The internal overflow valve provides safety protection: if the outlet pipeline is blocked, the valve opens automatically to divert oil back to the suction side, preventing pump burnout and pipeline damage. The whole purification process runs at normal temperature without heating, and it will not change the physical and chemical properties of the hydraulic oil. After repeated circulation, the oil cleanliness reaches the ISO 4406 standard required by servo hydraulic systems.
Product Structure and Typical Specifications
| Item | Parameter Details |
|---|---|
| Pump Type | Low noise gear pump, self-priming design |
| Filtration Precision | 3μm, 5μm, 10μm, 20μm, 40μm optional |
| Flow Rate | 10 L/min, 25 L/min, 40 L/min, 63 L/min, 100 L/min |
| Working Pressure | 0–0.6 MPa, with overflow pressure relief |
| Filter Media | Multi-layer glass fiber composite / cellulose media |
| Power Supply | 220V single phase / 380V three phase, explosion-proof optional |
| Oil Viscosity Range | 10–460 mm²/s |
| Casters | Silent PU universal wheels with brake |
| Protection | Pressure gauge, overflow valve, thermal overload protection |
| Optional Upgrade | Water absorption coalescing cartridge, oil particle counter interface |
Core Advantages
Flexible mobile design:
Compact trolley frame with brake casters, easy to transport to different hydraulic stations and workshop areas.
Multi-stage progressive filtration:
Coarse filtration first protects the pump, fine filter improves oil cleanliness, suitable for servo hydraulic systems with high cleanliness requirements.
Dual functions for oil transfer and purification:
It can be used for new oil filling and offline circulating filtration, one machine for two purposes.
Complete safety protection:
Overflow relief valve, thermal relay and pressure monitoring reduce the risk of equipment damage caused by misoperation.
Compatible standard hydraulic filter elements:
Easy to source replacement cartridges, compatible with mainstream brands, low long-term maintenance cost.
Wide oil compatibility:
Suitable for anti-wear hydraulic oil, gear lubricating oil, turbine oil and light diesel fuel.
Application Scenarios

Offline circulating filtration of fixed hydraulic stations in steel mills and factories
Wind turbine gearbox and hydraulic unit oil maintenance
Injection molding machine, die casting machine and hydraulic press oil purification
Mining excavators, loaders and heavy machinery on-site oil cleaning
New oil filling and pre-filtering before adding oil to hydraulic tanks
Lubrication system maintenance for paper, textile and metallurgical equipment
Machinery repair shop fluid treatment and oil recycling
Selection Guide
Confirm the required flow rate according to the tank volume. For offline kidney-loop filtration, the recommended flow rate is 5–10% of the total oil volume per hour.
Select filtration precision: servo valve hydraulic systems usually require 3–5μm; general hydraulic circuits use 10–20μm.
Confirm oil viscosity and working temperature. High viscosity oil needs a lower flow rate and matched pump.
Choose power supply: 380V three phase for industrial workshop; 220V single phase for maintenance service.
For oil with free water, select the coalescing water-absorbing filter cartridge upgrade option.
For hazardous areas such as oil depots, select explosion-proof motor and explosion-proof electrical cabinet configuration.
Installation & Maintenance Notes
Check the suction hose and outlet hose before startup to avoid air leakage. Make sure the suction end is equipped with a strainer and cannot be exposed above the oil surface. Start the machine for a short test run and check whether there is oil leakage at the pipe joints.
Observe the pressure gauge regularly. If the pressure reading rises rapidly, stop the machine and replace the filter cartridge in time. Do not run the trolley with a blocked filter element for a long time. Keep the gear pump well lubricated; avoid running the pump without oil for dry suction. After use, clean the hoses and coil them neatly on the trolley frame. Store the filter cart in a dry indoor area to prevent rust on the pump and frame.
FAQs
Q1: Can this filter cart remove water from hydraulic oil?
A1: Standard models only remove solid particles. If the oil contains free water, we can equip it with coalescing water-absorbing filter cartridges to separate water at the same time.
Q2: How long does it take to clean a hydraulic oil tank?
A2: It depends on tank size and initial contamination level. Normally, circulate 3–5 times the tank volume to reach the target ISO cleanliness grade.
Q3: Is it compatible with hydraulic filter elements from Pall or Hydac?
A3: Yes. We provide interchangeable filter elements with the same size, thread and performance parameters, direct replacement without modification.
Q4: Can it work outdoors for construction machinery maintenance?
A4: The standard version is for indoor use. We can customize waterproof and dustproof electrical parts for outdoor service, and explosion-proof versions for special hazardous sites.
Q5: What is the difference between this portable trolley and vacuum oil purifier?
A5: This filter cart is mainly for particle removal and oil transfer. Vacuum oil purifiers focus on high water content, gas removal and deep dehydration. Choose vacuum purifier if your oil has severe water ingress.
Related Products
0060D020BN4HC Hydac oil filter cartridge
OFU10P2N2B03B hydac filter cart
Of5f10p6n2b05e Hydac Hydraulic Oil Filtration Unit Oil Filter Cart
HYDAC protable oil filter cart
0060D 200W Replace HYDAC stainless steel mesh filter cartridge
Please fill in your procurement needs and contact information







