pp melt blown filter cartridge price
Introduction:Industrial Water Treatment P P Melt Blown Filter Cartridge 100micron PP melt blown filter cartridge PP Melt Blown Filter Cartridge is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at rand
We're here to help:
Easy ways to get the answers you need.
Product parameter:
PP melt blown filter cartridge
PP meltblown filter element has a gradient distribution of pore diameters along the diameter direction (it can gradually become smaller from the inside to the outside, but also gradually decrease from the outside to the inside, depending on the filtration needs of different media). During the filtration process, the large The aperture part can accommodate large particles with enough space to ensure that the filter element will not be blocked quickly, and at the same time provide good shape rigidity; the small aperture part can block fine particles to ensure filtration accuracy, thereby avoiding the high-precision filter element from clogging fast and life Short ills, but also reduce the filter resistance, reduce energy consumption, and improve the service life of the filter element.
The parameter of PP melt blown filter element:
|
specification |
Filtration accuracy |
0.5, 1.5, 10, 25, 50,75, micron |
|
length |
251,254,500,508,750,762,1000,1016mm |
|
|
Inner diameter |
PP-28,30mm 202SS, 304SS,316LSS-26,28,30,36,42,60MM |
|
|
Outside diameter |
63,115mm |
|
|
Structural materials |
Filter media |
100%Polypropylene fiber |
|
Internal skeleton |
Polypropylene, glass reinforced polypropylene, ss201, ss304, ss316L, titanium |
|
|
Inner liner |
Polypropylene, absorbent cotton, glass fiber, carbon fiber, polyester, nylon, polyacrylonitrile |
|
|
O-ring & gasket |
EPDM, Buna N, Silicone, Viton, Teflon coated Viton |
|
|
Operational restrictions |
Maximum operating pressure |
30 psid/2.1 bar at 70℃ 60 psid/ 4.2 bar at 20℃ |
|
Recommended operating temperature |
176°F/80℃ |
Product features
1.Gradient aperture structure, high dirt holding capacity
2.High-purity polypropylene material, broad chemical resistance
3.Uniform distribution of voids, high filtering effect and large area
4.Twice the service life and low replacement cost
5.Internal ironing treatment and PP center rod structure to avoid fiber precipitation
6.NFS certification
More products recommend:
https://www.xxfilter.com/Water_Filtration_Service/Please fill in your procurement needs and contact information
