1micron Industrial PP Melt Blown water Filter for Water Trea
Introduction:1micron Industrial Water Treatment PP Melt Blown Filter Cartridge PP melt blown filter cartridge PP Melt Blown Filter Cartridge is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random
We're here to help:
Easy ways to get the answers you need.
Product parameter:
PP melt blown filter cartridge
PP Melt Blown Filter Cartridge is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong pollutants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.
Technical parameters of PP melt blown filter cartridge
|
Spectication |
Filtration accuracy |
0.5, 1.5, 10, 25, 50,75, micron |
|
length |
251,254,500,508,750,762,1000,1016mm |
|
|
Inner diameter |
PP-28,30mm 202SS, 304SS,316LSS-26,28,30,36,42,60MM |
|
|
Outside diameter |
63,115mm |
|
|
Structural materials |
Filter media |
100%Polypropylene fiber |
|
Internal skeleton |
Polypropylene, glass reinforced polypropylene, ss201, ss304, ss316L, titanium |
|
|
Inner liner |
Polypropylene, absorbent cotton, glass fiber, carbon fiber, polyester, nylon, polyacrylonitrile |
|
|
O-ring & gasket |
EPDM, Buna N, Silicone, Viton, Teflon coated Viton |
|
|
Operational restrictions |
Maximum operating pressure |
30 psid/2.1 bar at 70℃ 60 psid/ 4.2 bar at 20℃ |
|
Recommended operating temperature |
176°F/80℃ |
Features and Benefits of large flow water filter:
1) 5 &10 Micron nominal filtration.
2) High chlorine taste and odor reduction-high chlorine adsorption capacity.
3) High dirt holding capacity extends service life.
4) Excellent for pre-filtration or pre-treatment in RO application.
5) Designed to be used in most standard-size housings.
6) Performance data based on manufacturer's internal testing.Not performance certified or tested by NSF.
7) Reduces Chlorine/chloramines, VOCs, pesticides and taste / odor contaminants.
8) Change cartridge every 6-10 months or upon substantial pressure reduction.
Please fill in your procurement needs and contact information
