CAA11-5 High Efficiency Coalescer Filter for Oil & Gas Industry
Introduction:Introduction: The CAA Series 5 coalescer cartridges are available in two cartridge mounting styles: self centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance—uniform threads, no shrinkage, no galling and no gasket to recover.
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Product parameter:
The CAA Series 5 coalescer cartridges are available in two cartridge mounting styles: self-centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance— uniform threads, no shrinkage, no galling and no gasket to recover. A permanently affixed Buna-N gasket seals against the V-type knife edge mounting adaptor to provide a positive seal. It will not separate from the cartridge during installation or change out.
For Maximum Water Coalescing Efficiency and Solids Holding Capacity
CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from aviation fuel.
The coalescer separator housings equipped with CAA Series 5 coalescer and companion separator cartridges have been tested and fully qualified to meet the performance requirements to EI 1581, 6th Edition, Category C.
Built for balanced fluid flow-thru and structural strength, each CAA Series 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a coated, perforated metal center tube—all encased in an outer sock material. All are 6" OD (152 mm) by 3½" ID (89 mm) and available in standard interchangeable nominal lengths from 11¼" (290 mm) to 57¼" (1450 mm).
Standard Design Features
• Qualified to the 6th Edition of EI 1581, Category C
• Multi-layered media for increased solids holding capacity • Ultra-fine solids removal
• Maximum water coalescence
• Balanced cartridge flow characteristics
• Recommended maximum operating temperature: 240 °F (115 ºC)
• Withstands in excess of 75 psi (5.17 bar) differential pressure • pH range from 5 to 9
• Screw base or open-end configuration Materials
• All metal components are treated against corrosion
• Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
• Buna-N gaskets—other materials are available on request
Please fill in your procurement needs and contact information
