Coalescer Element P-TYPE P.3-727 For Mobile and stationary refuelling equipment
Introduction:Coalescer elements are designed to coalesce free water and to remove fine solids from aviation fuels. Coalescers are deployed at the first stage in a filter/water separator, when fuel enters the vessel. LEFILTER K-Type coalescer elements are intended for use in filter/water separators on refuellers, hydrant dispensers and other mobile refuelling equipment. They are characterized by an excellent dirt holding capacity and high water removal efficiency. We're here to help:
We're here to help:
Easy ways to get the answers you need.
Product parameter:
APPLICATION AREA
Mobile and stationary refuelling equipment
Tank farms
Ships and loading terminals
Refineries
TECHNICAL DATA
Nominal filtration: According to EI 1581 7th Edition
Flow direction: In-to-out
Change-out differential pressure: 1.0 bar (15 psi)
Maximum pressure differential rating: 5.2 bar (75 psi)
Service time (max.): 3 years¹)
Storage time (max.): 5 years¹)²)
Operating temperature: Min. -30°C (-22°F) / Max. 80°C (176°F)
1) Manufacturer recommendation
2) Manufacturer recommendation: 20°C and max. 50% humidity after date of shipment out of stock of LEFILTER
STANDARD DESIGN
Outside diameter: 152 mm (6 inch)
Center tube: Epoxy coated steel
Gaskets: NBR (Buna-N)
End caps: Polyamide, glass fiber reinforced / Epoxy coated steel
Labeling on end caps: According to EI specification
ELEMENT CODE
Please fill in your procurement needs and contact information
