Coalescer Element P-TYPE P.1-842 For Mobile and stationary refuelling equipment
Introduction:Coalescer elements are designed to coalesce free water and to remove fine solids from aviation fuels. Coalescers are deployed at the first stage in a filter/water separator, when fuel enters the vessel. LEFILTER K-Type coalescer elements are intended for use in filter/water separators on refuellers, hydrant dispensers and other mobile refuelling equipment. They are characterized by an excellent dirt holding capacity and high water removal efficiency.
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Coalescer elements are designed to coalesce free water and to remove fine solids from aviation fuels. Coalescers are deployed at the first stage in a filter/water separator, when fuel enters the vessel. LEFILTER K-Type coalescer elements are intended for use in filter/water separators on refuellers, hydrant dispensers and other mobile refuelling equipment. They are characterized by an excellent dirt holding capacity and high water removal efficiency.
APPLICATION AREA
Mobile and stationary refuelling equipment
Tank farms
Ships and loading terminals
Refineries
TECHNICAL DATA
Nominal filtration: According to EI 1581 7th Edition
Flow direction: In-to-out
Change-out differential pressure: 1.0 bar (15 psi)
Maximum pressure differential rating: 5.2 bar (75 psi)
Service time (max.): 3 years¹)
Storage time (max.): 5 years¹)²)
Operating temperature: Min. -30°C (-22°F) / Max. 80°C (176°F)
1) Manufacturer recommendation
2) Manufacturer recommendation: 20°C and max. 50% humidity after date of shipment out of stock of LEFILTER
STANDARD DESIGN
Outside diameter: 152 mm (6 inch)
Center tube: Epoxy coated steel
Gaskets: NBR (Buna-N)
End caps: Polyamide, glass fiber reinforced / Epoxy coated steel
Labeling on end caps: According to EI specification
ELEMENT CODE
ELEMENT SELECTION
Please fill in your procurement needs and contact information
