Separator Element 60-TYPE 60.644-1188-D For Ships and loading terminals

Separator elements are used as the second stage of a high-performance separation in filter/water separators. After emergence from the coalescer, aviation fuels pass through the pores of the separator element while water droplets are repelled by the hydrophobic separator surface. Water droplets settle into the filter/water separator sump to be drained off.

LEFILTER 60-Type separator elements are available with a Teflon®-coated screen or synthetic mesh. Separator elements with a Teflon®-coated screen can be reused after a cleaning during coalescer element changeouts. Small areas of damage can be temporarily repaired. It is recommended that separator elements with a synthetic mesh are replaced during coalescer changeouts.

APPLICATION AREA

• Mobile and stationary refuelling equipment 

• Tank farms 

• Ships and loading terminals 

• Refineries

TECHNICAL DATA

• Flow direction: Out-to-in

• Service time (max.): 10 years¹⁾³⁾ / 3 years²⁾³⁾

• Storage time (max.): 5 years⁴⁾

• Operating temperature: Min. -30°C (-22°F) / Max. 80°C (176°F)

1) Separator with a Teflon® coated screen

2) Separator with synthetic mesh

3) Manufacturer recommendation

4) Manufacturer recommendation: 20°C and max. 50% humidity after date of shipment out of stock of LEFILTER

STANDARD DESIGN

• Outside diameter: See page 2 

• Center tube: Epoxy-coated steel 

• Gaskets: NBR (Buna-N) 

• End caps: Polyamide, glass fibre reinforced / Epoxy-coated steel 

• Labeling on end caps: According to EI specification

ELEMENT CODE

ELEMENT SELECTION

1) The table is for illustrative purposes. These and other lengths are available. Please inquire.