CAA Series 5 Coalescer Cartridges CAA38-5 For Petroleum Industry
Introduction:The CAA Series 5 coalescer cartridges are available in two cartridge mounting styles: self centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance—uniform threads, no shrinkage, no galling and no gasket to recover.
We're here to help:
Easy ways to get the answers you need.
Product parameter:
The CAA Series 5 coalescer cartridges are available in two cartridge mounting styles: self-centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance— uniform threads, no shrinkage, no galling and no gasket to recover. A permanently affixed Buna-N gasket seals against the V-type knife edge mounting adaptor to provide a positive seal. It will not separate from the cartridge during installation or change out.
For Maximum Water Coalescing Efficiency and Solids Holding Capacity
CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from aviation fuel.
The coalescer separator housings equipped with CAA Series 5 coalescer and companion separator cartridges have been tested and fully qualified to meet the performance requirements to EI 1581, 6th Edition, Category C.
Built for balanced fluid flow-thru and structural strength, each CAA Series 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a coated, perforated metal center tube—all encased in an outer sock material. All are 6" OD (152 mm) by 3½" ID (89 mm) and available in standard interchangeable nominal lengths from 11¼" (290 mm) to 57¼" (1450 mm).
Standard Design Features
• Qualified to the 6th Edition of EI 1581, Category C
• Multi-layered media for increased solids holding capacity • Ultra-fine solids removal
• Maximum water coalescence
• Balanced cartridge flow characteristics
• Recommended maximum operating temperature: 240 °F (115 ºC)
• Withstands in excess of 75 psi (5.17 bar) differential pressure • pH range from 5 to 9
• Screw base or open-end configuration Materials
• All metal components are treated against corrosion
• Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
• Buna-N gaskets—other materials are available on request
CAA Series 5
Coalescer Cartridges
Qualified to EI 1581, 6th Edition, Category C
MODEL NUMBER | NOMINAL LENGTH (in) | NOMINAL LENGTH (mm) | OUTSIDE DIAMETER (in) | OUTSIDE DIAMETER (mm) | INSIDE DIAMETER (in) | INSIDE DIAMETER (mm) | MOUNTING STYLE |
CAA11-5 | 11¼ | 290 | 6 | 152 | 3½ | 89 | Rod |
CAA14-5 | 14½ | 370 | 6 | 152 | 3½ | 89 | Rod |
CAA14-5SB | 15 | 380 | 6 | 152 | 3½ | 89 | Screw Base |
CAA22-5 | 22½ | 560 | 6 | 152 | 3½ | 89 | Rod |
CAA22-5SB | 23 | 580 | 6 | 152 | 3½ | 89 | Screw Base |
CAA28-5 | 28½ | 730 | 6 | 152 | 3½ | 89 | Rod |
CAA28-5SB | 29 | 740 | 6 | 152 | 3½ | 89 | Screw Base |
CAA33-5 | 33½ | 840 | 6 | 152 | 3½ | 89 | Rod |
CAA33-5SB | 34 | 860 | 6 | 152 | 3½ | 89 | Screw Base |
CAA38-5 | 38 | 960 | 6 | 152 | 3½ | 89 | Rod |
CAA38-5SB | 39 | 990 | 6 | 152 | 3½ | 89 | Screw Base |
CAA43-5 | 43½ | 1100 | 6 | 152 | 3½ | 89 | Rod |
CAA43-5SB | 45 | 1140 | 6 | 152 | 3½ | 89 | Screw Base |
CAA56-5 | 56½ | 1430 | 6 | 152 | 3½ | 89 | Rod |
CAA56-5SB | 57 | 1450 | 6 | 152 | 3½ | 89 | Screw Base |
NOTE: The Facet screw base adaptor part number is 677453A-AM
Please fill in your procurement needs and contact information
