P-all HIGH FLOW WATER TREATMENT FILTER HFU640GF200H13

Housing Design

Three configurations are available: horizontal6, vertical and centerpipe design.

The in-line horizontal configuration eliminates the need for a platform, or ladder, to remove the filters from the housing.

Vertical vessels may be more appropriate when floor space is limited. However, a platform may be needed to easily remove the elements.

In both the standard horizontal and vertical configurations, the inlet pipe is located between the filter element tubesheet and housing lid. The larger the vessel diameter, the longer the distance to reach in and remove the elements from the vessel. In a centerpipe vessel the housing lid is closer to the filter tubesheet. When the lid is opened the filters are easily accessible for installation and removal. Centerpipe vessels are larger in diameter, and more costly.

• Designed to the ASME, section VIII, division 1 code
• Maximum differential pressure across tubesheet: 5.17 bard (75 psid) maximum
• Standard housing gasket: spiral wound 304 stainless steel mineral fiber
• Carbon steel exterior surfaces: sandblasted and coated with an inorganic zinc
• Vent and drains: 1 inch FNPT
• Corrosion allowance: 1/8 inch