Pall VRF Varnish Remediation System
Introduction: Features ofPall VRF Varnish Remediation System Conforms to the ANSI B31.1 - Power Piping Code andthe ANSI B31.3 - Process Piping Code Varnish removal vessel with specially designed adsorptivemedia optimized for removal of varnish-formingpr
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Features of Pall VRF Varnish Remediation System
- Conforms to the ANSI B31.1 - Power Piping Code and the ANSI B31.3 - Process Piping Code
- Varnish removal vessel with specially designed adsorptive media, optimized for removal of varnish-forming precursors from the oil
- Outlet filtration with Pall Ultipleat® SRT technology, antistatic and rated at ß12(c) >1000 for additional protection and cleanliness
- Control system designed to maintain optimum oil temperature for the most efficient removal of varnish
- Simple, reliable operation requiring minimal operator attention
Dimensions
Width: 40˝ (1,016.0 mm)
Length: 76˝ (1,930.4 mm)
Height: 66˝ (1,676.4 mm)
Weight: Approx. 1,570 lb. (712.2 kg)
Design Characteristics
Flow Rate: 11 gpm (41.6 lpm) @ 60Hz
Maximum Inlet Viscosity: 500 SUS (100 cSt)
Inlet Pressure Range: –14˝ Hg (–0.47 Barg) to 10 psig
(0.69 Barg)
Maximum design temperature: 160°F (71°C)
Standard electrical: 480V, 3 phase, 60 Hz; FLA = 8.0 amps
Cooler motor power: 2 HP
Pump motor power: 1.5 HP
Connection size: Inlet – 1.0 NPT, Discharge – 0.75 NPT
Piping: Stainless Steel Tubing – no flexible hoses
Materials of Construction
Materials of construction and paint are compatible with
mineral-based fluids and include carbon steel, stainless
steel, copper, brass, aluminum, bronze, and fluorocarbon
seals. Consult factory for synthetic fluids.
Ordering Information
VRF11-■-●-▲-♦-▼
| ■ | Voltage Options |
| W | 480/3P/60Hz |
| 1 | 575/3P/60Hz |
| R | 380/3P/50Hz |
| T | 415/3P/50Hz |
| ● | Mechanical Design |
| 0 | non coded |
| XX | Special: ASME/ANSI, PED, CRN, etc. Please consult factory. |
| ▲ | Cooler Options |
| N | None |
| S | Standard air-over-oil cooler |
| HC | High-capacity water-over-oil cooler |
| ♦ | Mobility Options |
| N | None |
| C | Casters |
| P | Tow package (rubber tires) |
| ▼ | Electrical Design options |
| N | Standard=non-hazardous/non explosion proof |
| ZZ | Special:NEC,IEC,CSA,ATEX,etc. Please consult factory |
| Spare Parts | Pall Part Number |
| Varnish removal cartridges | VRF-PGG |
| Polishing filter element | UE219AS08Z |
| VRF vessel sealing gasket | 55856 |
| Spare o-rings (62mm x 4mm VITON 70 DURO) (used for cartridges, sealing lid, and center post) | 54789 |
Please fill in your procurement needs and contact information