Activated Carbon Filter Box for Paint Spraying VOC Treatment
Activated Carbon Filter Box for Paint Spraying VOC Treatment

Activated Carbon Filter Box for Paint Spraying VOC Treatment

Introduction:Paint spraying operations release VOCs, paint mist and irritating odors that violate environmental emission standards and harm on-site workers’ respiratory health. Many small and medium coating workshops struggle with high-cost imported air purification systems and complex maintenance requirements. Our activated carbon filter box is designed for low-concentration, large-air-volume exhaust from paint booths. It efficiently adsorbs benzene, xylene, esters and other volatile organic compounds, delivering stable exhaust purification. It serves as a practical replacement for imported air treatment equipment, helping coating factories meet local environmental regulations with lower investment and simpler daily operation.

We're here to help:
Easy ways to get the answers you need.

  • Product parameter
  • Inquiry

Product parameter:

Product Introduction

This activated carbon filter box is dedicated to paint booth exhaust gas purification, widely used in manual spraying, automatic spraying and paint mixing room VOC treatment. It can be matched with front paint mist filter, dust removal system and exhaust fan, and it shares mature sealing and airflow design logic with Dust Collector Filter and Air compressor filter, guaranteeing stable sealing and low airflow resistance under long continuous operation. The whole unit consists of carbon steel or PP anti-corrosion cabinet, drawer-type carbon cassettes, pre-filter cotton layer, differential pressure gauge, inspection door and explosion-proof accessories on request. We adopt high iodine value honeycomb or pellet activated carbon with abundant microporous structure, which can trap organic gas molecules efficiently. Many imported VOC treatment devices on the market have high purchase price and complicated regeneration procedures. Our modular design solves these pain points: carbon cartridges can be pulled out and replaced quickly without professional tools, and the unit has no rotating parts, greatly reducing breakdown risks. It is an ideal purification solution for furniture painting, metal surface coating, automotive refinishing and hardware spraying workshops worldwide.


Working Principle

Activated Carbon Filter Box for Paint Spraying VOC Treatment

Polluted exhaust air from the paint booth is driven by the exhaust fan and enters the filter box from the inlet. The airflow first passes through the pre-filter cotton layer, which intercepts paint overspray, oil mist and solid dust particles. This pre-treatment step prevents paint residue from blocking the micropores of activated carbon and extending the service life of carbon media.

After pre-filtering, the clean gas stream flows evenly through the multi-layer activated carbon bed. Activated carbon has millions of tiny pores and huge specific surface area. VOC molecules such as benzene, toluene, xylene and solvent odor are captured by van der Waals force and fixed inside the carbon micropores. Purified air passes through the carbon bed and is discharged out of the outlet up to standard.

With continuous adsorption, the activated carbon gradually reaches saturation. When the adsorption capacity declines or the differential pressure rises to the preset value, operators need to replace the saturated carbon cassettes with new ones. The whole system runs continuously, and the replacement process is fast and does not require long shutdown of the spraying production line. For projects with high VOC load, we can design dual-box switching structure to realize non-stop carbon replacement.


Product Structure and Typical Specifications

ItemParameter Details
Cabinet MaterialCarbon steel with anti-rust coating / PP polypropylene / 304 stainless steel
Adsorption MediaHoneycomb activated carbon / Pellet activated carbon, iodine value ≥800mg/g
Pre-filter LayerPaint stop filter cotton, G4 / F5 grade optional
VOC Removal Efficiency85%~95% for low-concentration spraying exhaust
Working Air Volume1000–50000 m³/h, customized
Working Temperature≤60℃ (high temperature version available)
Pressure Drop150–400 Pa
Installation FormHorizontal / Vertical
Optional AccessoriesDifferential pressure gauge, explosion-proof door, temperature alarm, fire suppression port
Carbon Replacement ModeDrawer pull-out modular cassette


Core Advantages

Modular drawer design: 

Carbon cassettes can be pulled out directly for replacement, convenient for maintenance, no complicated disassembly work.

Dual-stage filtration structure: 

Pre-filter cotton blocks paint mist and dust, avoiding early saturation of activated carbon and saving consumable cost.

Wide adaptability for spraying VOCs: 

Works well for paint solvents, thinners, adhesive odor and various low-concentration organic waste gas.

Low energy consumption: 

No moving components inside the cabinet, only supporting the exhaust fan, low running power consumption.

Customizable cabinet size: 

Flexible layout to fit small paint booths and large automatic spraying lines, indoor and outdoor installation optional.

Safe configuration for coating workshops: 

Explosion-proof, temperature monitoring and pressure relief options can be equipped to reduce fire risks of flammable solvent gas.


Application Scenarios

Activated Carbon Filter Box for Paint Spraying VOC Treatment

Furniture and wood paint spraying booth exhaust treatment

Metal parts, steel structure anti-corrosion coating workshop

Auto parts, car repair refinishing paint room

Hardware, plastic product surface spraying line

Paint mixing room and solvent storage room odor removal

Printing, ink and adhesive low-concentration VOC treatment

Small and medium coating factory environmental compliance projects


Selection Guide

Confirm the total exhaust air volume of the paint booth, match the box size and carbon bed area to avoid excessive air velocity that reduces adsorption efficiency.

Check the VOC concentration and paint mist content: heavy paint mist condition must add multi-stage pre-filter cotton.

Choose cabinet material: PP cabinet for corrosive solvent gas; carbon steel for normal dry spraying environment.

Confirm working temperature: exhaust temperature cannot exceed 60℃ under normal condition; high temperature gas needs cooling pretreatment.

For high concentration VOC, we suggest combining activated carbon filter box with UV photocatalytic equipment to form a combined treatment system.

If local environmental rules require continuous emission monitoring, we can reserve interfaces for gas detection sensors.


Installation & Maintenance Notes

Install the filter box on the exhaust pipeline behind the paint booth, ensure the air inlet and outlet direction are correct, and seal the connecting flange tightly to prevent air leakage. Keep the inspection door accessible for regular checking. Check the differential pressure gauge every day. If the pressure difference rises rapidly, it means the pre-filter cotton is clogged and needs replacement. Monitor the exhaust odor: when obvious solvent smell appears at the outlet, the activated carbon is saturated and needs to be replaced immediately. Do not use the unit for high-temperature flue gas. Keep the workshop away from open flame, because adsorbed solvent gas is flammable. Saturated activated carbon must be handed over to qualified hazardous waste treatment agencies for disposal, not dumped randomly. Record the replacement cycle of carbon media to arrange maintenance plans in advance.


FAQs

Q1: Can this carbon filter box handle paint mist directly?

A1: No. Paint mist will quickly cover the carbon surface and block the micropores. A paint stop pre-filter cotton layer is mandatory in front of the carbon box to intercept paint particles.

Q2: What is the service life of activated carbon for paint spraying?

A2: It depends on air volume, VOC concentration and daily working hours. Normally it lasts 1–3 months for continuous spraying. Pressure difference and outlet odor are the most direct judgment indicators.

Q3: Can we regenerate the saturated activated carbon on site?

A3: The standard box is designed for disposable carbon replacement. If you need on-site regeneration, we can configure thermal desorption regeneration system for large-scale projects.

Q4: Is this equipment explosion-proof?

A4: Standard version is normal type. For spraying workshops with flammable solvent, we can add explosion-proof door, temperature alarm and fire suppression port to meet safety requirements.

Q5: Can it match my existing paint booth and exhaust fan?

A5: Yes. We customize inlet/outlet flange size, air volume and cabinet dimension according to your paint booth parameters, easy to connect with your existing exhaust system.


Related Products 

XF Series auto self cleaning strainer 

S304 S316 stainless steel fully Automatic Backwash Water 

316L Stainless Steel Brush Self-Cleaning Filter for Corrosive Water 

Heavy Duty Brush Type Self-Cleaning Strainer | Customizable Size & Material 

Brush Type Self-Cleaning Filter | Automatic Backwash Filter for Industrial Water Treatment

Please fill in your procurement needs and contact information

whatsapp